hello, welcome to guangdong source lei powder limited company website!
+86-757-22910350 中文版 ENGLISH
Home
About Us
Products
Barium Sulfate
Calcium Carbonate
Talcum Powder
News
Contact Us
NEWS CENTER
Company News
Industry News
Technical exchange
Service Hotline: 86-757-22910350
Source lei tell you | how to distinguish between quartz stone, quartz sand and silica powder?
Source Lei tell you | how to distinguish between quartz stone, quartz sand and silica powder? Quartz stone, quartz sand, silica powder is the main component of silica, what is the difference between the three? What is their respective role? Quartz stone is a non-radioactive pollution, reusable environmental protection, green new building materials. It is based on unsaturated polyester resin (UPR) or methacrylic acid resin (PMMA) organic polymer material as the matrix, quartz powder, particles and other fillers, adding pigments and other auxiliaries, after vacuum high pressure molding polymer composite materials. Quartz is a stable mineral at room temperature, insoluble in water and
15
2020
/
04
Yuan Lei Small Classroom | How to Surface Modification of Heavy Calcium Carbonate?
How to carry out surface modification of heavy calcium carbonate? Surface modification is one of the most important deep processing technologies for heavy calcium carbonate and superfine heavy calcium carbonate. At present, the surface modification of heavy calcium carbonate is mainly based on organic coating and compound modification. 1, heavy calcium carbonate organic coating modification organic coating modification is based on organic matter, such as stearic acid and its salts, aluminate coupling agent, titanate coupling agent, water-soluble polymer surface coating/modifier, the heavy calcium carbonate powder coating to modify the method. At present, dry modification is the mainstream process of heavy calcium carbonate, unless the wet ultrafine grinding process is used,
Yuan Lei tells you | Anticorrosive floor construction technology and its construction specifications
Yuan Lei told you | the construction technology of anticorrosion floor and its construction specification are rarely used in our daily anti-corrosion floor. Because of its corrosion resistance, strong acid and alkali resistance, chemical solvent resistance, impact resistance, anti ground cracking characteristics. Therefore, it is mainly used on the ground, walls and equipment surfaces of electroplating plants, battery plants, chemical plants, electrolytic cells, pharmaceutical plants, acid-base neutralization pools and other places. It is precisely because of these characteristics, so the construction process of anti-corrosion floor has become the key to the qualified floor. So, anti-corrosion floor construction technology is what? What are the norms of anti-corrosion floor construction? Next, we understand its process together. 1. construction technology 1, according to the ground conditions to do a good job of grinding, repair, decontamination, dust removal of the ground treatment work; 2, the use of permeability and adhesion of strong primer roll coating an epoxy primer, enhance the surface adhesion; 3, glass fiber laying. Lay a full layer with glass fiber cloth; 4. Add epoxy two-component quartz sand and coat it evenly with trowel. 5. Add a proper amount of putty powder with epoxy two-component and coat it evenly with trowel. Multi-channel epoxy putty; 6. Heavy-duty anticorrosive topcoat is required. This knife process needs to be painted on two to three sides. 7, to 250C shall prevail, 24 hours before the person, 72 hours after the heavy pressure, when the temperature is low, the interval time should be moderately extended according to the climate floor use time. 2. construction specification 1. Waterproof treatment should be done on the base surface to prevent delamination of the surface caused by the return of moisture on the base surface. 2. Clean up the ground for plain ground and polish it according to the actual situation to make it flat and clean the ground garbage. 3. Cement and styrene-acrylic emulsion are used to repair the local unevenness. The surface requirements after foundation treatment include: the strength and flatness of the base surface shall meet the requirements of anticorrosion floor, no cracking and oil pollution; 4. After epoxy anticorrosive primer is mixed evenly according to an appropriate proportion, the material is coated on the treated base surface and hung evenly and thinly. No coating is allowed to be missed, so as to facilitate the construction of the surface coating on the top and then complete the sealing primer. 5. First, lay the FRP cloth flat on the ground, and then use AD epoxy resin anticorrosive paint, paste the glass lining on the glass fiber reinforced plastic cloth by rolling or scraping. For example, if you paste the glass fiber reinforced plastic cloth three times or more, you only need to repeat this construction method. 6. Coat the prepared anti-corrosion epoxy and coat it evenly with a trowel. 3. anticorrosion floor construction matters needing attention 1, whether the foundation ground level. 2, do a good job of waterproof layer. 3, the ash layer to deal with clean. 4, avoid the temperature is too high or too low. The causes and treatment methods of 4. anti-corrosion floor blistering after painting anti-corrosion floor paint engineering, paint film blistering after painting is one of the most common problems, paint blistering after painting is mainly due to two factors, as follows: 1, before painting on the surface of the attachment cleaning is not in place, the surface is still residual impurities and moisture. 2. The brushing tool fails to clean up in time and the brushing is not uniform enough, resulting in gaps. Solution: floor paint needs to be completely stripped from the surface, and then re-painted to lock the moisture completely dry. In summary, the construction technology of anti-corrosion floor, the construction specification of anti-corrosion floor, the precautions of anti-corrosion floor construction and the reasons for blistering after anti-corrosion floor painting and the relevant contents of the treatment method are introduced.
Yuan Lei tells you | bulk filler of industrial ceramic filler
Yuan Lei tells you | Industrial ceramic filler bulk filler Industrial ceramic filler has good corrosion resistance, heat resistance and good surface wettability, and is cheap. At present, it is widely used in gas absorption, gas washing, liquid extraction and other processes. The bulk packing is a particle body with a certain geometric size, which is piled up in the tower. There are mainly the following. 01 Rassey ring packing Rassey ring packing was invented by Rassey (F.Rashching) in 1914. It is a ring with equal outer diameter and height. 02 Pall ring filler Ceramic Pall ring filler is developed on the basis of ceramic Rassey ring
Source Lei small classroom | quartz sand supply capacity or become a bottleneck in the development of photovoltaic glass enterprises!
Source Lei tells you how to carry out surface modification of heavy calcium carbonate?
Surface modification is one of the most important deep processing technologies for heavy calcium carbonate and ultrafine heavy calcium carbonate. At present, the surface modification of heavy calcium carbonate is mainly based on organic coating and compound modification. 1, heavy calcium carbonate organic coating modification organic coating modification is based on organic matter, such as stearic acid and its salts, aluminate coupling agent, titanate coupling agent, water-soluble polymer surface coating/modifier, the heavy calcium carbonate powder coating to modify the method. At present, dry modification is the mainstream process of heavy calcium carbonate, unless the wet ultrafine grinding process is used,
10