Yuanlei | Sulfuric Acid Series-High-gloss Sulfuric Acid Series

Release time:

2024-01-29 09:37


Yuanlei | Sulfuric Acid Series-High-gloss Sulfuric Acid Series


Chinese name:high-gloss barium sulfate

英文名称:High Light Barium sulfate

Chemical formula: BASO?

Molecular weight: 233.39 (according to the 1979 International Atomic Scale)

CAS No.: 13462-86-7

EINECS号 :236-664-5

H.S. Coding: 2833270000


White powder, relative density 4.0-4.5, insoluble in water, acid, alkali and other solvents, but soluble in strong acid and concentrated sulfuric acid. Heat resistant, acid resistant, alkali resistant, non-toxic, tasteless can be used in contact with food products.

Good dispersion, high whiteness, good leveling. It has excellent light resistance, weather resistance and acid resistance. It has good chemical inertness and moderate surface energy, so that it has good dispersion and affinity with other media as a functional filler. And with all the color has good compatibility. Can replace part of the precipitated barium sulfate, titanium dioxide, active silica and other high-priced raw materials, reduce costs. It is an environmentally friendly material that can absorb harmful rays.



High-gloss barium sulfate is produced by special chemical synthesis process, special filtration technology and special surface treatment technology. It has the characteristics of high whiteness, no black particles, and good dispersion. This product is a white powder substance, non-toxic, tasteless, insoluble in water, acid, alkali and organic solvents, only soluble in hot concentrated sulfuric acid, and does not react with any gas. Therefore, it is a product with excellent weather resistance and corrosion resistance.


1, high whiteness, and titanium dioxide use coordination.

2. The particles are small and uniform, and the particle size distribution is narrow, which is similar to that of imported titanium dioxide.

3. After special surface treatment, it has good dispersion and high affinity with resin.

4, in the titanium dioxide particles between the isolation, so that titanium dioxide particles to protect each other

Hold a certain distance, give full play to the performance of titanium dioxide, improve the efficiency of the cover.

5, the product is pure, does not contain black particles, to ensure the purity of the product.




1, plastic, with good dispersion, can enhance the hardness and rigidity of plastic, maintain the surface gloss and brightness of plastic, especially suitable for the manufacture of high-gloss PP and nylon parts of home appliance shell.



In terms of powder coatings, it can enhance the leveling and gloss retention of powder coatings, and has good compatibility with all pigments.







Barium sulfate, titanium dioxide, with, dispersion, particle, special, soluble, surface, good

Yuan Lei's Little Knowledge | Application of Wet Mica Powder in Rubber


Wet mica powder is widely used, not only in coatings but also in rubber. Below, the editor will take you to understand the application of wet mica in rubber.

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.