%{tishi_zhanwei}%

Source Lei | Magnesium Silicate Series-Magnesium Silicate

Release time:

2024-01-29 09:37

 

Source Lei | Magnesium Silicate Series-Magnesium Silicate

 

Magnesium silicate

 

Specifications:There are40,000,000,000,000,000,000,000,000,000,000

 

Performance:White or almost white, fine, non-sand powder, hand feel greasy. Odorless, tasteless. This product does not dissolve in water, dilute mineral acid or dilute alkali hydroxide solution.

 

Scope of application:

 

(1) Coating grade (TL): used for white body pigments and various water-based, oil-based, resin industrial coatings, primers, protective paints, etc.

 

(2) paper grade (ZZ): used for all kinds of paper and paperboard filler, wood asphalt control agent.

 

(3) plastic grade (SL): used for polypropylene, nylon, polyvinyl chloride, polyethylene, polystyrene and polyester plastic filler.

 

(4) Rubber grade (AJ): Used for rubber fillers and anti-sticking agents for rubber products.

 

(5) cable grade (DL): used for cable rubber additive, cable isolation agent.

 

(6) Ceramic grade (TC): used in the manufacture of electric porcelain, radio porcelain, various industrial ceramics, architectural ceramics, daily ceramics and enamel.

 

(7) Waterproof material grade (FS): used for waterproofing membrane, waterproof coating, waterproof ointment, etc.

 

(8) Fine talcum powder: used for advanced paint coatings, plastics, cable rubber, cosmetics, copper board paper coatings, textile lubricants, etc.

 

Silicic acid, for, rubber, cable, filler, white, ceramic, coating, plastic

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings

2024-06-12


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings

2024-06-04


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.

Yuan Lei's Little Knowledge | Characteristics of Mineral Materials

2024-05-21


Mineral materials refer to the material products obtained by processing and transforming natural minerals (mainly non-metallic minerals) or rocks as the main raw materials, or minerals or rocks that can be directly used as materials and aim to utilize their main physical and chemical properties. This meaning mainly includes the following four aspects: first, natural minerals and rocks that can be directly utilized or processed to be utilized; Secondly, finished or semi-finished materials made mainly from natural non-metallic minerals and rocks through physical and chemical reactions; Thirdly, artificially synthesized minerals or rocks; Fourthly, the direct utilization targets of these materials are mainly their own physical or chemical properties, not limited to individual chemical elements.