%{tishi_zhanwei}%

Yuan Lei's Little Knowledge | The Difference between Powder Coatings and Waterborne Coatings

Release time:

2024-01-29 09:34

Powder coatings and water-based coatings are a kind of coatings, which are widely used in various industries. In order to let everyone know more about the difference between the two, let's take a look at powder coatings and water-based coatings.

powder coating

Powder coating is a solid resin and pigments, fillers and additives composed of solid powder synthetic resin coating.

water-based coatings

A coating that uses water as a solvent or dispersion medium. Water-based coatings do not require a dissolving agent, and are roughly divided into three types of water-soluble coatings, water-diluted coatings, and water-dispersible coatings, and are widely used in the industry.

 

 

 

Difference

The essential difference between powder coatings and water-based coatings is that one is a liquid coating and the other is a solid coating.

Compared with water-based coatings, powder coatings are VOC-free, theoretically 100% utilization, more environmentally friendly.

The thickness of one-time coating of powder coating is generally 60 ~ 80u, and it is difficult for liquid to do so.

Powder coatings are currently mainly coated by charging, so it is difficult to use all substrates. At present, metal substrates are the main substrates. Liquid does not have this restriction.

Powder coatings are difficult to achieve some surface effects of liquid coatings. For example, the mirror effect, even the best powder coating is difficult to avoid defects such as orange peel. Therefore, it is difficult for powder coatings to completely replace liquid coatings.

6. Coating resin system: the resin system of both water-based coatings and powder coatings is quite similar. Popular indoor and outdoor systems are available. The text is all: polyester, epoxy, acrylic and other water-based coatings and powder coatings. Therefore, the use of both occasions, the application industry also has a common, but not completely universal.

7. Water-based coatings can be made with strong metal feeling and bright enough metal effect. The problem that the limited metal particles of powder coating are arranged inside the powder coating, at present, the bonding metal powder can only partially replace the paint or achieve the effect of water-based metal paint. But on the whole, the application of bonding metal powder is still very wide. Water-based coatings and powder coatings on the surface effect of the difference, mainly in the metal effect, plain color effect, almost the same.

 

Powder coating, coating, waterborne, effect, metal, liquid, system, present, difference

Yuan Lei's Little Knowledge | Application of Wet Mica Powder in Rubber

2024-06-19


Wet mica powder is widely used, not only in coatings but also in rubber. Below, the editor will take you to understand the application of wet mica in rubber.

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings

2024-06-12


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings

2024-06-04


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.