Yuan lei's little knowledge | what are the advantages and disadvantages of transparent powder as filler

Release time:

2024-01-29 09:34

Transparent powder is a non-metallic mineral with high transparency, good whiteness, non-toxic, tasteless, acid and corrosion resistance. With high transparency, the refractive index of the filling material itself is very close to that of most synthetic resins, so the filling amount of the filler does not affect the transparency of the finished product; it can improve the surface smoothness and abrasion resistance of the product; low oil absorption, large filling amount, which is beneficial to reduce the manufacturing cost of the product.



Transparent powder is a new type of inorganic filler, which has the characteristics of high transparency, good hardness, good hue, high gloss, good collapse resistance and less dust when used. Widely used in oily furniture paint, decoration paint, adhesives, inks, and plastics. At first, transparent powder was only used in oily wood paint. In a few years, the market reaction gradually changed from unfamiliar and understanding to cautious use and a large number of application stages. From a single paint industry to the paint industry, to the entire chemical industry.

Transparent powder also has the characteristics of high toughness, so that the quality of the paint film has been greatly improved, its use value has been recognized by the paint industry, and some well-known enterprises have adopted it in large numbers. Transparent powder has good chemical stability, acid and alkali resistance, and does not contain toxic and harmful substances, allowing customers to use it at ease.


Transparent powder as a filler in the application, there are several small problems need to pay attention:

1. High grinding difficulty

Because of its high hardness, high toughness will cause the paint film is difficult to polish, which needs to change from the concept, because the hardness, toughness, means that the quality of the paint film is improved, the relative polishing difficulty is also increased.

2. Transparent powder is difficult to prevent settling

There are many successful experiences in the paint industry in the anti-sinking of pigments and fillers. Usually, there are two principles of anti-sinking: one is longitudinal anti-sinking and the other is horizontal anti-sinking. As soon as the transverse and longitudinal cross, it will form a reticular structure with the best anti-settling effect. Of course, anti-settling is not absolute. When the paint is thin, there is still a tendency for transparent powder to sink compared with resin, because its specific gravity is larger than that of resin, so the spraying time is required to be adjusted appropriately.

3. Moisture-proof is difficult

Some transparent powder on the market is very easy to absorb moisture, so the packaging must be moisture-proof.

Transparent powder as a kind of outstanding performance, more economical, environmental protection, the use of more secure functional transparent filling material, will bring a new pattern for the polymer material filling material industry.

Filler, transparent, filling, industry, coating, improve, because, film, toughness, transparency

Yuan Lei's Little Knowledge | Application of Wet Mica Powder in Rubber


Wet mica powder is widely used, not only in coatings but also in rubber. Below, the editor will take you to understand the application of wet mica in rubber.

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.