%{tishi_zhanwei}%

Yuan Lei's Little Knowledge | Types and Properties of Quartz Ore

Release time:

2024-01-29 09:34

The main component of quartz is SiO2, colorless and transparent, often containing a small amount of impurities, and become translucent or opaque crystals, hard texture. Quartz is a kind of physical and chemical properties are very stable mineral resources, the crystal belongs to the trigonal system of oxide minerals. Quartz, also known as silica, is mainly the raw material for the production of quartz sand (also known as silica sand), and is also the raw material for quartz refractory materials and ferrosilicon.

 

               

Quartz ore resources are mainly these types of deposits, namely, natural crystal, quartz sandstone, quartzite, vein quartz, powder quartz and natural quartz sand.

 

01Natural Crystal

Natural crystal is a quartz crystal mineral, its main component is silicon dioxide (chemical formula: SiO₂), natural crystal alias is water, water jade, etc., usually massive or granular aggregates, generally colorless, gray, milky white, containing other mineral elements is purple, red, smoke (tea), yellow, green and so on.

 

 

02quartz sandstone

More than 90% of the detrital material of quartz sandstone is quartz detrital, with a few feldspars, rock debris, etc., and few heavy minerals, often stable and rounded heavy minerals, such as tourmaline, maltine, rutile, etc. The main component is silica, with a content of up to 95%-99.5%, which is mainly used in various aspects such as glass raw materials, siliceous refractories, metallurgical auxiliary raw materials and minerals.

 

 

03Quartzite

Quartzite is a kind of metamorphic rock mainly composed of quartz, which is formed by metamorphism of quartz sandstone and siliceous rock. Quartzite is generally massive structure, granular metamorphic structure, a crystalline aggregate. The color of quartz is also very rich, common colors are green, gray, yellow, brown, orange red, white, blue, purple, red and so on.

 

 

04vein quartz

Vein quartz is a collection of quartz, milky white, gray white, grease luster, compact block, specific gravity of about 2.65, melting point of 1700 ℃ above, good temperature resistance, good acid and alkali resistance, poor thermal conductivity, high insulation, low expansion, stable chemical properties, hardness greater than 7.

 

 

05Powder Quartz

The parent rock of natural silt quartz ore is a dense quartzite composed of fine quartz particles with a uniform particle diameter. Under the action of surface weathering, the body is broken and finely broken into powder quartz. The content of silica is 95%-98%, some can be as high as 99%, and the content of Fe2 is 0.04-1%.

 

 

06natural quartz sand

Natural quartz sand is a non-metallic mineral substance, its main mineral composition is silica, the color is milky white or colorless translucent, hardness of 7, brittle without understanding, shell-shaped fracture, grease luster, density of 2.65, mainly used in glass, casting, ceramics and refractory materials, smelting ferrosilicon.

 

Quartz, natural, mineral, quartzite, silica, quartz sand, one kind, crystal, raw material

Yuan Lei's Little Knowledge | Application of Wet Mica Powder in Rubber

2024-06-19


Wet mica powder is widely used, not only in coatings but also in rubber. Below, the editor will take you to understand the application of wet mica in rubber.

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings

2024-06-12


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings

2024-06-04


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.