%{tishi_zhanwei}%

Yuan Lei's Little Knowledge | Conversion of Mbytes to Micron

Release time:

2024-01-29 09:34

definition of particle mesh:

The larger the mesh number, the finer the particle size of the material; the smaller the mesh number, the larger the particle size of the material.Sieving particle size is the size of the mesh that the particles can pass through the screen. The number of meshes on the length of 1 inch (25.4mm) is called the mesh number.

The specifications of standard sieves vary from country to country. The commonly used Taylor system is the number of holes per inch long, which is called mesh. A 100-mesh sieve, for example, represents 100 openings per inch of screen.

Number of mesh and micron comparison table

 

 

The number of eyes is the number of holes, which is the number of holes per square inch.The larger the mesh number, the smaller the aperture.Generally speaking,Mmesh x pore size (microns) = 15000. For example, the aperture of the 400 mesh is about 38 microns; the aperture of the 500 mesh is about 30 microns.

Due to the problem of opening rate, that is, because of the different thickness of the wire used in weaving the net, the standards of different countries are also different. At present, there are three kinds of American standards, British standards and Japanese standards, of which Britain and the United States are similar, and Japan is quite different. Our country uses the American standard, that is, it can be calculated by the formula given above.

Micron, standard, that is, aperture, screen, United States, larger, purpose, particle size

Yuan Lei's Little Knowledge | Application of Wet Mica Powder in Rubber

2024-06-19


Wet mica powder is widely used, not only in coatings but also in rubber. Below, the editor will take you to understand the application of wet mica in rubber.

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings

2024-06-12


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings

2024-06-04


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.