Source lei little knowledge | titanium dioxide and lide powder in what's the difference?

Release time:

2024-01-29 09:34

What is the difference between titanium dioxide and lide powder?

titanium dioxide

Titanium dioxide (TiO2) is an important inorganic chemical products, in the paint, ink, paper, plastic rubber, chemical fiber, ceramics and other industries have important uses. Titanium dioxide (English name: titanium dioxide), the main component of titanium dioxide (TiO2) white pigment. The scientific name is titanium dioxide (titanium dioxide), and the molecular formula is TiO2, which is a polycrystalline compound with a regular arrangement of particles and a lattice structure. Titanium dioxide has the smallest relative density. The production process of titanium dioxide has two process routes: sulfuric acid method and chlorination method.



Lit powder

The lithopone is white crystalline powder. It is a mixture of zinc sulfide and barium sulfate. The more zinc sulfide, the stronger the hiding power and the higher the quality. Density 4.136~4.34g/cm3, insoluble in water. When exposed to acid, it is easy to decompose to produce hydrogen sulfide gas, and when exposed to hydrogen sulfide and alkali solution, it does not work. Irradiated by ultraviolet rays in sunlight for 6 to 7 hours, it becomes light gray and still restores its original color in the dark. It is easy to oxidize in the air, and caking and metamorphism after being affected with moisture.


Lide, titanium dioxide, titanium oxide, tio2, white, density, zinc sulfide, hydrogen sulfide, a

Yuan Lei's Little Knowledge | Application of Wet Mica Powder in Rubber


Wet mica powder is widely used, not only in coatings but also in rubber. Below, the editor will take you to understand the application of wet mica in rubber.

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.