%{tishi_zhanwei}%

Yuan Lei Small Classroom | Precautions for Home Safety Protection

Release time:

2024-01-29 09:38

 

Yuan Lei Small Classroom | Precautions for Home Safety Protection

 

The current epidemic prevention and control situation is still very serious

For the presentSo grimThe situation

Home Safety Protectionshould be howSpecificWhat about the operation?

Please see what Huazhong University of Science and Technology Hospital has prepared for everyone.

"Fourteen Points for Attention at Home"

 

Home protection precautions

 

1. Fever patients and other home isolation should try to live in a single room and maintain relative isolation;

 

2. In order to prevent cross-infection during the incubation period, it is recommended that healthy family members also keep a distance of more than one meter, wear masks, and talk less face-to-face at close range. Those with conditions are recommended to live in a single room; daily necessities should be separated, and try not to share toilets.

 

3. When discarding the used mask, do not touch the outside of the mask, pinch the strap of the mask with your fingers and throw it into the medical waste container; wash your hands immediately after removing the mask;

 

4. Advocate public chopsticks and separate meals. Family bowls and chopsticks are dedicated separately. Boil with boiling water for 15-30 minutes after meals for disinfection;

 

5. Separate cutting boards and knives for handling cooked food and raw food, and wash hands after handling raw food and cooked food;

 

6. The room is frequently ventilated, 2-3 times a day, 20-30 minutes each time;

 

7. Every day, the floor, tables, chairs, benches, door handles and toilet are wet wiped and mopped with 84 disinfectant at a concentration of 1:100. After 30 minutes, wet wipe and mop with clear water once, twice a day. When using 84 disinfectant, pay attention to ventilation and wear masks and gloves;

 

8. Ordinary clothes, bed sheets, bath towels, towels, etc. can be cleaned with 60-90 ℃ hot water and ordinary household laundry detergent, and completely dry after cleaning;

 

9. All bed sheets, clothes and supplies of suspected and confirmed cases should be soaked with 84 disinfectant at a concentration of 1:100 for 30 minutes and then washed with clear water. The domestic sewage and excreta of patients should be soaked or sprayed with 84 disinfectant at a concentration of 2:100 for more than 30 minutes and then dumped or washed away;

 

10. Eliminate visits by relatives and friends;

 

11. Don't go out and go out less. If necessary, after going out and going home, you can disinfect the outer surface of the items brought back with 75% alcohol. Mobile phones and keys also need to be disinfected and wiped clean with paper towels. Wash hands with running water and soap or hand sanitizer, and wipe hands with disposable paper towels as much as possible after washing hands;

 

12. Each room in the family should use a separate garbage can with a lid, and the garbage bag should be sealed and disinfected after throwing the garbage;

 

13. Contacts of suspected or confirmed cases should be isolated for 14 days from the day after the last contact case, and protective measures should be taken to avoid mutual infection at home;

 

14. Regular work and rest, regular exercise, relax and improve immunity.

Safety, masks, home, disinfection, hand washing, 84, protection, disinfectant, concentration, use

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings

2024-06-12


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings

2024-06-04


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.

Yuan Lei's Little Knowledge | Characteristics of Mineral Materials

2024-05-21


Mineral materials refer to the material products obtained by processing and transforming natural minerals (mainly non-metallic minerals) or rocks as the main raw materials, or minerals or rocks that can be directly used as materials and aim to utilize their main physical and chemical properties. This meaning mainly includes the following four aspects: first, natural minerals and rocks that can be directly utilized or processed to be utilized; Secondly, finished or semi-finished materials made mainly from natural non-metallic minerals and rocks through physical and chemical reactions; Thirdly, artificially synthesized minerals or rocks; Fourthly, the direct utilization targets of these materials are mainly their own physical or chemical properties, not limited to individual chemical elements.