Adhere to the floor cleaning and maintenance can extend the service life of the floor.
01 Do not abuse the machinery, try to avoid heavy knocking on the ground when using, do not use very heavy or hard objects to hit the ground, unless the need for work, please avoid frequent unnecessary grinding.
02 surface cleaning, epoxy floor surface cleaning method is simple, general water scrub. Such as the death of cleaning stains, the use of cleaning agents can also be used industrial degreasing agents, descaling agents, etc., and then rinse with water. For quite stubborn stains, mechanical cleaning methods can also be used, but do not put pressure on the ground, wear too much to affect the ground level and gloss.
03 If it is worn or scratched due to long use time, local repair can be carried out in a small area. If the area is large, it is recommended to roll it again. If there is any large paint film damage, repair it in time so as to carry out repair before oil dirt penetrates into the foundation. When the floor is washed with water in the workshop, avoid the oil-water mixture from depositing on the depth of the damage. Dispose of clean in time with dry cloth.
04 If there are coarse and hard sand particles and mud on the ground, they should be cleaned in time to avoid grinding and damaging the ground. When using tools, tools should be avoided from being scattered and hurting the ground. All hard feet (such as iron chairs, iron tables, iron shelves, etc.) must be wrapped in soft plastic, rubber or paper pads to avoid scratching the floor surface during use.
05 to avoid chemical pollution.
06 Use sawdust to often clean the area where the oil is dripping, so as not to denature the oil, adsorb the ash layer and become stubborn stains. Large area of oil immersion area, available wide cloth mop, push the sawdust dry floor oil.
The correct maintenance method can make the ground as new, and can extend the service life.
01 Floor cleaning. First with a washing machine plus neutral detergent to clean the ground, and then use a vacuum cleaner to wash the ground sewage. Then dry the ground and wait for the next step.
02 Cloth wax. With wax drag will be epoxy floor wax is "∞" shape uniform mop cloth to the ground. When mopping the cloth, pay attention to the uniformity of the wax in each dip, and operate from front to back. Another if it is a large area of epoxy floor cloth wax, can be a number of workers lined up, and wear a good shoe cover, while operating. After the wax layer is dried, the wax layer can be dried according to the actual situation. The method is the same as the first time.
03 Polishing. After the wax layer is dry, you can use the polishing machine and polishing pad to polish the epoxy floor to increase the gloss of the ground.
In the use of the process, the cleaning process and after use to master the appropriate maintenance methods, in order to make the ground as new.