Yuanlei | Sulfuric Acid Series-Precipitated Sulfuric Acid Series

Release time:

2024-01-29 09:37


Yuanlei | Sulfuric Acid Series-Precipitated Sulfuric Acid Series


Chinese name: precipitated barium sulfate

English Name:The leaves of the green grass with salt,

CAS No.:7727-43-7

Chemical formula:BaSO₄

Molecular weight:233.39 (according to the 1979 International Atomic Scale)

CAS No.: 13462-86-7

EINECS号 :236-664-5

H.S. Coding: 2833270000


No qualitative white powder. Relative density 4.50. Melting point 1580 ℃. Insoluble in water, ethanol and acid. Soluble in concentrated sulfuric acid, easy to agglomerate when dry. It is cothermally reduced with carbon to barium sulfide. In the air in the case of hydrogen sulfide and toxic gases do not change color.


Widely used in various coatings, plastics, rubber, paint, ink, insulating tape, ceramics, batteries, enamel and other industries. Can be used for acid-resistant rubber products and general products. It can also be used as a surface coating agent, a sizing agent, a weighting agent, etc.



"YLFT" precipitated barium sulfate has the advantages of strong chemical inertness, good stability, acid and alkali resistance, moderate hardness, high specific gravity and good whiteness. Can be used as a white filler, can also be used as a filler for rubber and paper, can increase its weight and smoothness. Used as filler, brightening agent and weighting agent in rubber, plastics, paper making, paint, ink, coating and other industries. Used as a fining agent in glass products, can play the role of defoaming and increase gloss. It can be used as a protective wall material for radiation protection. Also used in ceramics, enamel, spices and pigments and other industries. It is also a raw material for the manufacture of other barium salts.








Barium sulfate, for, used as, precipitation, industry, rubber, enamel, ink, weighting

Yuan Lei's Little Knowledge | Application of Wet Mica Powder in Rubber


Wet mica powder is widely used, not only in coatings but also in rubber. Below, the editor will take you to understand the application of wet mica in rubber.

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.