%{tishi_zhanwei}%

Source Lei | Silicon Micropowder Series-Spherical Silicon Micropowder

Release time:

2024-01-29 09:37

 

Source Lei | Silicon Micropowder Series-Spherical Silicon Micropowder

 

spherical silica powder

 

 

Performance:Source Lei brand silicon powder is a white amorphous powder, light weight.

 

 

Features:Silicon powder refractoriness> 1600 ℃. Bulk density: 200~250kg/m3; more than 80% of the silicon powder has a fineness of less than 1 micron, an average particle size of 0.1~0.3 microns, and a specific surface area of 20~28 m/g. Its fineness and specific surface area are about 80 to 100 times that of cement and 50 to 70 times that of fly ash.

 

 

Scope of application:Paint coating with silicon powder, epoxy floor with silicon powder, rubber with silicon powder, sealant with silicon powder,. Silicon micropowder for electronic and electrical grade plastic sealing materials, silicon micropowder for precision ceramics.

 

1、Silica powder for paint coatingNumber of meshes: 400-2500 meshes

SiO2:>99.5 whiteness: between 70-94 degrees hardness: 7 (Mohs hardness)

Oil absorption, low mixing viscosity, good dispersion and fluidity, small angle of repose formed by accumulation and friction resistance.

 

2、Silicon powder for epoxy floorNumber of meshes: 400-1250 meshes

SiO2:>99% whiteness: between 70-94 degrees hardness: 7 (Mohs hardness)

Low viscosity, good fluidity, good accumulation, easy compaction, easy to combine with epoxy resin. Compared with traditional silicon powder, it can save the amount of epoxy resin.

 

3、Microsilica powder for rubberNumber of meshes: 1250-5000 meshes

SiO2:>99.5 whiteness:>70-94 degrees hardness: 7 (Mohs hardness)

Wear-resistant rubber products include rubber plates, pipes, belts and rollers. It requires the compound to have good permeability and strong adhesion. The test results show that the compound filled with silicon micropowder fully embodies the unique properties of the compound such as thin rubber, good permeability, good dispersion and strong adhesion, which is conducive to the wiping of the compound on the canvas and enhances the adhesive strength between the film and the canvas, the tear strength, permanent deformation and other mechanical properties of the product.

 

4、Silica powder for sealantNumber of meshes: 1250 meshes

SiO2:>99.5 whiteness:>80-94 degrees hardness: 7 (Mohs hardness)

The water content of the treated silica powder is less than 0.1%, which can improve the adhesive strength, yield value and shear dilution index of colloid when used in sealant. With thickening, reinforcing effect, anti-tearing, anti-aging effect.

 

5、Silicon micropowder for electronic and electrical grade plastic sealing materialsNumber of meshes: 600-5000 meshes

SiO2:>99.5 whiteness:>90 degrees hardness: 7 (Mohs hardness)

Quasi-spherical silicon powder used in epoxy resin insulation packaging materials, can greatly increase the filling amount, reduce the viscosity of the mixed material system, improve the processing performance, improve the permeability of the mixture, reduce the expansion coefficient of the cured material and the shrinkage rate of the curing process, reduce the thermal expansion difference.

 

6、Silicon powder for precision ceramicsNumber of meshes: 5000 meshes

SiO2:>99.7 whiteness:>92 degrees hardness: 7 (Mohs hardness)

 

 

 

 

Silicon powder, hardness, hardness, sio2,99.5, viscosity, between, sealant, epoxy resin

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings

2024-06-12


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings

2024-06-04


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.

Yuan Lei's Little Knowledge | Characteristics of Mineral Materials

2024-05-21


Mineral materials refer to the material products obtained by processing and transforming natural minerals (mainly non-metallic minerals) or rocks as the main raw materials, or minerals or rocks that can be directly used as materials and aim to utilize their main physical and chemical properties. This meaning mainly includes the following four aspects: first, natural minerals and rocks that can be directly utilized or processed to be utilized; Secondly, finished or semi-finished materials made mainly from natural non-metallic minerals and rocks through physical and chemical reactions; Thirdly, artificially synthesized minerals or rocks; Fourthly, the direct utilization targets of these materials are mainly their own physical or chemical properties, not limited to individual chemical elements.