%{tishi_zhanwei}%

Yuan Lei's Little Knowledge | Barium Sulfate Series-Extinction Barium Sulfate

Yuan Lei's Little Knowledge | Barium Sulfate Series-Extinction Barium Sulfate ▷ Product Features Colorless orthorhombic crystal or white amorphous powder. Odorless. It's tasteless. Decomposition above 1600 ℃. Soluble in hot concentrated sulfuric acid, almost insoluble in water, ethanol and dilute acid. The relative density is 3.5~4.5. Boiling point 1149 ℃. Soluble in hot concentrated sulfuric acid, easy to agglomerate when dry. 600 ℃ with carbon can be reduced to barium sulfide. Advantages 1, more bright color: good dispersion of matte barium, play a maximum hiding power, at the same time as the carrier of the pigment to make the pigment efficient dispersion and obtain uniform color; high purity whiteness make the tone brighter pure; fine crystal structure characteristics and high refractive index, make the color more rich and full. 2, more stable system: extinction barium good chemical inertness, so that all kinds of system basic environment to maintain stability; ultra-fine particle surface energy is strong, good compatibility, can be combined with other materials organic cross, enhance the binding force; evenly dispersed differential monomer, stable suspension in the system, do not produce flocculation or precipitation. 3. Stronger paint film: the high density of extinction barium brings good wear resistance; the strong surface of ultra-fine particles can make the film and the substrate more firmly combined; uniform ultrafine particles. Make the paint film more smooth, more durable. 4, more excellent weather resistance: extinction barium excellent chemical inertness, waterproof acid, can resist acid rain, high temperature and corrosion resistance; at the same time has a special ray absorption function, greatly improve the weather resistance of the coating. Use 1. Used in coatings and industry. Can be used as a paint, coating filler to replace precipitated barium sulfate, lide powder, titanium dioxide, active silica and other high-priced raw materials, suitable for controlling the viscosity of the paint, so that the product color bright, stable and good. 2, used in the plastics industry. -It can be used as a filler for plastic ABS raw materials, and can also be used in chips and mahjong to make the product shiny and bright, and at the same time, it can also improve the strength, rigidity and wear resistance of the product. 3. Used in rubber industry. 400 mesh products can be used in a large number of rubber products as a filler, reduce costs, improve product hardness, acid and alkali resistance and water resistance, and natural rubber and synthetic rubber has a good reinforcing effect. 4. Used in paper industry. High fineness barite powder can be used for white board paper, copper board paper filler and coating filler, in order to improve the whiteness, improve the surface coverage.

06

2023

/

10

Yuan Lei's Little Knowledge | Application (II) of Quasi-spherical Silica Powder in Functional Coatings

In the coating industry, silicon powder as a functional coating filler, although the amount is not a lot, but has a good competitive advantage, especially quasi-spherical silicon powder. Quasi-spherical silica powder is processed from natural micro-crystalline quartzite after long-term weathering in nature and is produced in a finely divided form. It has high purity, fine particles, good dielectric properties and thermal conductivity, and has the advantages of low expansion coefficient, high heat resistance, high humidity resistance, high filling amount, low expansion, low stress, low impurities, low friction coefficient, etc. It plays an important role in functional coatings. 1. Application of quasi-spherical silica powder in high temperature resistant powder coatings The preparation of high temperature resistant powder coatings mainly starts from two aspects, one is to use the heat resistance stability of silicone resin, and the other is to use the heat resistance of quasi spherical silicon powder. High temperature resistant powder coating by a single resin or filler can not meet the requirements of high temperature resistance, quasi spherical silicon powder, talc powder filler is the skeleton of heat resistant coating, can greatly improve the performance of the coating. 2. Application of quasi-spherical silica powder in insulating powder coatings Insulation powder coating requirements of the technical indicators are more stringent, moisture resistance, flame retardancy, breakdown voltage and other indicators are the application of quasi spherical silicon powder heat resistance, density to complete. 3. Application of quasi-spherical silica powder in flame retardant powder coatings At present, the main varieties of flame retardant powder coatings are epoxy powder coatings, which are generally configured by adding flame retardants (additive type) or introducing flame retardant groups (reactive type) into the polymer chain of resin base materials, and then matching temperature resistant pigments, fillers, etc. Among them, the choice of filler plays a great role in improving the flame retardant effect of powder coating. Quasi spherical silica powder has the highest heat resistance, so it becomes the preferred filler for flame retardant powder coatings. In recent years, with the development and application of various special functional coatings, silicon powder has been paid more and more attention by coating users due to its excellent performance such as temperature resistance, weather resistance, abrasion resistance and corrosion resistance.

04

2023

/

10

Yuan Lei's Little Knowledge | (II) of Difference between Light Calcium Carbonate and Heavy Calcium Carbonate

According to the different production methods of calcium carbonate, calcium carbonate can be divided into heavy calcium carbonate, light calcium carbonate, colloidal calcium carbonate and crystalline calcium carbonate. Before, I have already known some differences between light calcium and heavy calcium. Let Xiaobian continue to show you the other differences between the two. ● Different particle shapes ● With a high-power microscope, the particles of ordinary light calcium are more regular and are usually spindle-shaped when fully dispersed. For light calcium carbonate, the particle shape of the synthetic product can be artificially controlled, and the control agent can be added during the carbonization process to achieve control. At present, the developed control agents include inorganic acids, inorganic bases, organic acids (amino acids), alcohols, sugars, proteins and biopolymers with special structures. For example, the double hydrophilic block polymer PEG-b-PMAA can be made into diamond, peanut, long rod, spherical and dumbbell-shaped carbonic acid under different concentrations and different pH values. For example, the dendrimer polyaspartic acid can be made into spiral-shaped carbonic acid, as another example, spherical calcium carbonate can be obtained by adding anionic dextran. Heavy calcium products due to the use of mechanical crushing and classification, particle morphology is generally cube, multi-prism, cuboid and other irregular forms. For different heavy calcium processing methods, the microscopic shape of calcium carbonate is different, for example, the calcium carbonate processed by rein grinding is spindle-shaped, and the calcium carbonate processed by air flow grinding is particle-shaped. ● Different oil absorption values ● The oil absorption value of light calcium carbonate is 60-90 ml/100mg, which is much larger than 40-60 ml/100mg of heavy calcium carbonate. Therefore, there is a big difference between liquid absorption and resin absorption. If the formula contains liquid additives, heavy carbonic acid with small oil absorption and inorganic powder with large oil absorption value should be selected, which will lead to an increase in the amount of coupling agent to be treated. If you choose light carbonic acid in the PVC formula, you will consume more liquid additives and PVC trees. Therefore, considering the oil absorption value, you should choose heavy calcium carbonate with low oil absorption value as much as possible. ● Liquidity is different ● From the perspective of fluidity, the microstructure of light calcium carbonate is spindle-shaped, and its own oil absorption value is relatively large, which can absorb the components that promote flow in the formula, such as lubricants, plasticizers, coupling agents, dispersants, etc., so its fluidity is not as good as heavy calcium carbonate. Generally, the fluidity will be seriously affected if the addition amount exceeds 25 parts, while heavy calcium carbonate can promote fluidity if it is granular, and the addition amount is not limited, in the PVC pipe formula, if more than 25 copies of calcium carbonate are added, it is best to choose heavy calcium carbonate from the perspective of fluidity. ● Different pH values The PH value of light calcium carbonate is 9-10, while the PH value of heavy calcium carbonate is 8-9, that is to say, the alkalinity of light calcium carbonate is stronger than that of heavy calcium carbonate, and it is easier to absorb acidic decomposition gas during the combustion process of calcium carbonate composite products. Therefore, the reason why calcium carbonate composite products incinerate low-toxic gas is that calcium carbonate itself is alkaline, which can absorb HCI, H2S and other acidic gases produced by combustion, and eliminate the hidden danger of dioxins produced by acid energy substances in case of chlorine elements. ● Different modification functions ● There are subtle differences between the modification effects of heavy and light calcium carbonate. Heavy calcium carbonate has better tensile strength, while light calcium carbonate has better impact strength and rigidity. Generally, the plastic surface with light calcium is smoother and the density is lower. The processing fluidity of heavy calcium plastic is better, and the performance of heavy calcium filled plastic with smaller particle size is also better.

25

2023

/

09

Yuan Lei's Little Knowledge | (I) of Difference between Light Calcium Carbonate and Heavy Calcium Carbonate

According to the different production methods of calcium carbonate, calcium carbonate can be divided into heavy calcium carbonate, light calcium carbonate, colloidal calcium carbonate and crystalline calcium carbonate. Let's take a look at the difference between heavy calcium carbonate and light calcium carbonate. heavy calcium carbonate Heavy calcium carbonate, referred to as heavy calcium. In coatings, paint, paper, construction, plastics, rubber and other industries. Light calcium carbonate Light calcium is light calcium carbonate, also known as precipitated calcium carbonate, referred to as light calcium. It can be used as a filler in rubber, plastic, paper, paint and ink industries. Widely used in organic synthesis, metallurgy, glass and asbestos production. Difference 1. Different sources: Light calcium carbonate: limestone raw materials are calcined to generate lime and carbon dioxide, and then water is added to digest lime to generate lime milk. Its main component is calcium hydroxide, and carbon dioxide is introduced into carbonized lime milk to generate calcium carbonate precipitate, which is dehydrated, dried and crushed, or sodium carbonate and calcium chloride are subjected to double decomposition reaction to generate calcium carbonate precipitate, which is dehydrated, dried and crushed. Heavy calcium carbonate: It is made by directly crushing natural calcite, marble, chalk, shells, etc. by mechanical methods. 2. Bulk density is different The most obvious difference between heavy calcium and light calcium lies in the different bulk density of the products. The bulk density of heavy calcium products is relatively large, generally 0.8~1.3g/cm3. However, the bulk density of light calcium products is relatively small, mostly 0.5~0.7g/cm3. Heavy calcium and light calcium products can also be roughly distinguished from the packaging volume of the products. Generally, heavy calcium products are mostly 25 kg/bag, and the packaging volume of the products is relatively small, and the same quality of light calcium product packaging volume is significantly larger. 3, the size of different whiteness Because heavy calcium products have more impurities, the whiteness of the products is generally 89% ~ 93%, and very few products can reach 95%. However, light calcium products are made by chemical synthesis, which removes many impurities and has high purity, so the whiteness is mostly 92% ~ 95%, and some products can reach 96% ~ 97%. This is also the main reason why light calcium products are mostly used for filling high-grade or light-colored products. 4. Different moisture content The moisture content of heavy calcium products is generally 0.2%~ 0.3%, and the moisture content is relatively low and stable at the same time. The moisture content of some high-grade heavy calcium products can even reach about 0.1%. Ordinary light calcium products moisture 0.3%~ 0.8%, sometimes there will be some fluctuations are not stable. Traditionally, the distinction between heavy and light calcium is to test water with a water instrument. Light calcium is when the water content is as large as close to 1%, and heavy calcium is when the water content is as small as below 0.1. 5. Different particle sizes The particle size of heavy calcium products ranges from 0.5 to 45um, and the particle size of the products varies with different crushing equipment. The particle size of ordinary light calcium products is generally 0.5 ~ 15um, because the particle shape is spindle shape, it is difficult to accurately determine, it is generally a range; the particle size of nano calcium carbonate in light calcium is finer, and the size is generally 20 ~ 200nm. The particle size of ordinary light calcium carbonate is generally about 2500 mesh, which can meet the performance needs of PVC pipes and profiles. Therefore, light calcium carbonate is traditionally selected for PVC pipes and profiles from the particle size. In the past, due to the limitation of crushing equipment, heavy calcium carbonate could not reach this fineness. Now the particle size of heavy calcium carbonate can fully meet the needs, even finer than light calcium carbonate, so now both PVC pipes and profiles can be selected.

22

2023

/

09

Yuan Lei's Little Knowledge | Calcium Carbonate Commonly Used in Paper Industry and Its Functional Characteristics

造纸行业是碳酸钙的最大市场之一,作为重要的造纸填料和涂布颜料,碳酸钙来源丰富,价格便宜;颗粒细,白度高,能显著提高纸张不透明度;吸油墨速度快,能增加纸的吸墨性;能使纸张比较柔软、紧密,光泽度高;对纸张的物理强度影响较小。 目前,造纸行业常用的碳酸钙种类主要有重质碳酸钙、轻质碳酸钙、纳米碳酸钙、混合碳酸钙、改性碳酸钙、碳酸钙晶须、浆状碳酸钙等。 01 重质碳酸钙 重质碳酸钙作为纸张填料,加入量较高,对纸张强度和施胶效果影响较小,拥有较好的纸张抄造性能。缺点是纸张的白度、不透明度稍差,需要加分散剂。 重质碳酸钙作为填料主要用于除卷烟纸、过滤纸和特种低定量信息用纸以外的印刷纸、书写纸、办公用纸和广告用纸中。     02 轻质碳酸钙 轻质碳酸钙作为纸张填料,可使纸张不透明度高,对纸机磨损低,且不需要加入分散剂。缺点是比表面积大,有损施胶效果;保水性强,不利于纸机车速提高。     03 纳米碳酸钙 在造纸过程中加入纳米碳酸钙填料后,纸张具有以下特性:可以减缓纸张的老化,使纸张得以保存更长的时间;使纸张能够吸收一定的紫外线;使纸张既不容易发黄又不容易发脆,并且具有良好的隔离性能等。 纳米碳酸钙用作造纸涂布颜料,有利于改善涂布纸的光泽度、白度和涂层的色相;可以保证白色颜料颜色的纯正;有利于提高纸张的不透明度、光泽及印刷光泽度等光学性质;能够改变涂料制备液的流变性能;实现涂料加工纸的功能化,如绝缘、导电、抗菌性能等。 纳米碳酸钙作为造纸填料,一般用在特殊纸制品的制作方面,如尿不湿、卫生巾、彩喷打印纸、纸巾及透气膜等。     04 混合碳酸钙 当混合碳酸钙用作印刷纸张填料时,纸张具有高亮度、良好的表面平滑度、高体积、高刚度和高抗拉强度等特点。当对含有混合碳酸钙的纸张施加更高的湿压压力时,与含GCC的纸张相比,可以获得更高的干度,从而显著降低干燥能量,降低温室气体,并节省造纸厂的生产成本。混合碳酸钙在水中湍流条件下,比预凝GCC(pGCC)更稳定。由于HCC可以使纸张具有高体积、高刚度、高抗拉强度而不失去平滑度,HCC有望应用于开发高加填印刷纸张。 05 改性碳酸钙 对碳酸钙进行表面改性,可以赋予碳酸钙以优良的物理化学性能。例如,采用碱沉淀法将壳聚糖用于沉淀碳酸钙(PCC)的有机覆膜改性,经改性后,加填浆料的滤水性能略有改善,溶解性也有所变化,加填纸的抗张指数得到显著提高。 06 碳酸钙晶须 碳酸钙晶须相比纳米碳酸钙,碳酸钙晶须发生团聚的可能性较小,可以更有效地发挥增韧和增强的作用。碳酸钙晶须具有特殊的柱状方向性,白度和填充性高,用于造纸填料时,在原纸表面平行而紧密地排列。因此,与使用粒状碳酸钙相比,其能使纸张具有更优良的质量指标。 07 浆状碳酸钙 使用浆状碳酸钙比固体钙有着更强大的优势。一方面是浆状钙没有经过干燥工序,即没有经过机械摩擦和碰撞,充分保留了自然形成的晶型,形态和大小更趋于一致。另一方面是浆状钙没有经过机械摩擦和碰撞,晶体碎屑较少,晶型端部保留了原始的钝尖状态,几乎没有损坏。价格便宜,浆状钙的填料留着率比使用粉钙提高近3%,降低了原料成本。卷烟纸企业一般选择当地浆状钙供货商,运输方式采取槽车或管道方式,十分方便。

18

2023

/

09

Yuan Lei tells you the role of barium sulfate in improving the powder rate of powder coatings.

1. control the powder particle size distribution, the narrower the better: reasonable control of powder particle size (more difficult), in our actual production only adjust the ACM main and auxiliary mill speed. Powder particle size is important 40-50UM is appropriate, the distribution of about narrow the better. 2. increase resin content: increase resin content, reduce filler content, select resin with good charging performance, epoxy is better to powder, polyester is not powdered by some manufacturers, polyester is more difficult to powder by some manufacturers (epoxy and polyester are ground into powder spray board separately), the leveling sprayed by friction spray gun is obviously better than that of electrostatic spray gun, and friction spray gun can spray thicker coating, and the coating does not have the disadvantages of high pressure gun, such as large orange peel. 3. and reasonable selection of fillers: filler fineness and dispersion are closely related to the powder. Precipitation on the powder is higher than the general ultrafine heavy barium, barium sulfate is better than calcium carbonate. 4. increase the charge aid: add the appropriate amount of conductive aid in the formula (mechanism of action: can make the powder particles carry more charge. There is a strong electric field in the area from the high-voltage electrostatic spray gun to the workpiece, and the air is ionized to produce hundreds of millions of ions. When the powder particles of the electric booster pass through this area, they are polarized, which can trap more negative ions and carry more charge. For the groove dead angle and other parts due to the weak power line of the Faraday effect, the powder particles with more charge can reach the surface of the workpiece by their own strength, thus improving the powder on these parts.

14

2023

/

09

< 1...131415...65 >