%{tishi_zhanwei}%

Yuan Lei | Glass Powder Series-Glass Powder

Release time:

2024-01-29 09:37

 

Yuan Lei | Glass Powder Series-Glass Powder

 

Glass powder

 

English NameGlass powder

 

PointsSubtypeSiO2            

 

PointsSub-quantity60.08(Press1979 International Atomic Table)

 

C A S No.7631-86-9       

 

EINECS号200-618-2     

 

H.S. Encoding:25061000

 

The main specifications are:400 mesh,600 mesh, 800 mesh,1250 mesh,1500 mesh, 2000 mesh,2500 mesh, 3000 mesh.

 

Performance: White powder.

 

Features:Glass powder is a kind of transparent powder which is easy to polish and resist high scratch, with small particle size, good dispersion and high transparency.After many surface improvements, it has good affinity and strong steric hindrance, can be easily dispersed in the coating, and can increase the fullness of the coating after film formation. The crystal transparent primer class not only maintains the transparency of the varnish, but also provides good polishing.

 

Use:

 

1、ApplicableInPolyurethane paint, Polyurethane paint,Nitropaint, alkyd paint, acrylic paint, vinyl acid paint, etc,PE transparent primer, etc.;Widely used as a dual-purpose paint on the bottom surface for decoration. It is recommended to add a proportion5%-10%.

 

2、Furniture paint finish, its transparency, thixotropy, hardness, abrasion resistance are very good, the recommended amount3-7%。

 

3、Suitable for plastic paint, metal paint, the recommended dosage is:5-15%

 

 

Glass powder, transparency, transparent, recommendations, add, primer, ability, apply, sanding

Yuan Lei's Little Knowledge | Application of Wet Mica Powder in Rubber

2024-06-19


Wet mica powder is widely used, not only in coatings but also in rubber. Below, the editor will take you to understand the application of wet mica in rubber.

Yuan Lei's Little Knowledge | Performance Requirements and Types of Fillers for Coatings

2024-06-12


Fillers in coatings are usually white or slightly colored pigments with a refractive index less than 1.7. It has the basic physical and chemical properties of pigments used in coatings, but due to its refractive index being similar to the film-forming material, it is transparent in coatings and does not have the coloring and covering power of coloring pigments. It is an indispensable pigment in coatings.

Yuan Lei's Little Knowledge | Application Effects of Different Mineral Powder Materials in Coatings

2024-06-04


In architectural coatings, commonly used mineral materials include barium sulfate, calcium carbonate, kaolin, mica powder, talc powder, quartz powder, silica micro powder, transparent powder, glass powder, wollastonite powder, etc. Reasonable application of various mineral materials can effectively improve or enhance the performance of coatings. Let's take a look at the application of different mineral materials in coatings.